ATMATIC 70PD
AUTOMATIC GLASS PANEL SCREEN PRINTER
This model is suitable for screen printing small size glass such as glass for appliance, door for microwave oven, partition for fridge, etc. and printing any rigid material as plastic, Acrylic, metal panel.
Equipped with the correcting device at feeding section, shuttle table with double-work station transports the substrate to attain precise centered alignment, nesting bars are equipped at bilateral side for printing edge-to-edge, the substrate is discharged by conveyor belt after printing.
Features
Entire machine is composed of feeding + printing + unloading section. After feeding conveyor transports the substrate to pre-registration correcting → shuttle table transports the substrate into printing section → shuttle table transports the substrate to unloading section after printing.
Shuttle table with double-work station is driven by servo motor, it is collocated with high precision Linear Guide Rail to attain smooth and stable fast movement, magnetic lock is used for precise positioning.
Nesting bars device adopts Guide Rail Cylinder to match high precise Linear Guide Rail to attain smooth and stable fast movement.
SEW gear motor is used to drive high leading screw rod transmission to lift up screen, ink is not flowed toward lateral side, encoder controls printing stroke precise positioning.
Connecting frame design is applied for screen frame holder, strength structure to suite high pressure full stroke printing.
Motor driven is associated with timing belt and linear guide rail to transmit printing stroke, fast and stable movement to attain repeatability printing accuracy within ±0.02mm.
E-stop is equipped at machine front side, and adding safety bar with safety loop wiring to protect operator security.
Specifications | ATMATIC 70PD Metric | ATMATIC 70PD US Standard Units |
Work flow direction | from right to left | from right to left |
Max screen frame O/D size | 850mm x 980mm | 33.46" x 38.58" |
Max printing area | 600mm x 700mm | 23.62" x 27.56" |
Min printing area | 200mm x 200mm | 7.87" x 7.87" |
Printing table height | 950mm + 30mm | 37.4" + 1.18" |
Shuttle table speed | 1500m/sec | 59.6"/sec |
Vacuum area | 600mm x 700mm | 23.62" x 27.56" |
Vacuum hole size | Ø 2.0mm | Ø 0.0787" |
Screen X/Y fine adjustment | ±10mm / ±10mm | ±0.39" / ±0.39" |
Substrate thickness | 2mm to 20mm | 0.07874" to 0.7874" |
Substrate weight | 3kg to 8kg | 6.6 lb to 17.6 lb |
Screen at cleaning level | 270mm | 10.6" |
Printing speed (digital setting) | 125mm to 750mm/sec | 4.9" to 29.5"/sec |
Cycle Speed (full speed, full stroke, non-stop) | 540 P/H | 540 P/H |
Electrical power | 3∮, 220V/380V, 50/60Hz | 3∮, 220V/380V, 50/60Hz |
Power consumption | 3.08kw | 3.08kw |
Compressed air pressure | 6.3-7.7 kg/cm² | 90 - 110psi |
Air exhaustion | 20.5 L/min | 0.72 cfm |
Machine dimensions | 1260mm x 1840mm x 3390mm | 49.6" x 72.44" x 133.46" |
Machine weight | 1460kg | 3218.7 lb |
Screen at stand-by level | 50mm | 1.97" |
Peel-off height | 0 to 20mm | 0 to 0.79" |
Printing head bias angle | ±8° | ±8° |
SCREEN FRAME HEIGHT: For the convenience of our customers, ATMA prepares all machines sold through RH Solutions to accept roller, diamond chase, and stretch and glue frames with heights 28mm - 52mm (1.1" - 2").